Animatek Ultimate Ztep Zeq v2.1- Ableton Max For Live-Step Sequencer AMXD

UZZ is a 16-step sequencer where you can adjust each parameter in every step independently. UZZ inspired on Ultimate Step Sequencer (USS) Created by Len Sasso.

Two controller values per step for remote control live parameters
Step play, mute and options
Keyboard transpose

Step Parameters:

- Mode: Play/Mute.
- Pitch: Range 0-12.
- Octave: -2 to +2, five eights.
- Velocity: Range 0 – 127.
- Duration: Range 2 – 1000ms.
- Two remote controls (control 1 and 2): 0 – 127.

Steps Controls:

All parameters have a button to change the sequencer randomly.
Press the name of the parameter to reset it.
Roll up and down the parameters with the arrows.

Global Parameters:

- Key Xpose:Keyboard icon activates midi notes input that will be affected by Transpose. (Double click on Keyboard icon reset the transpose to 0.)
- Transpose: Transposes the sequence: -24 to 24.
- Steps: Selects the number of steps: 1 – 16.
- Direction: Direction of the sequence: forward, backward. forward & backward.
- Reset: Reset the sequence to global clock of the song.
- Scale: Scale Select the type of scale (up to 19 different scales).
- Quantize: Quantize: Quantizes the sequence: 1/2, 1/4, 1/8,1/16, 1/32, Dotted and Triplets.
- Swing: Swing on/off, and Swing amount.
- Preset Map:You can map the preset change from your controller in number box, but you must enable it before with the map icon.
- Preset:To record shift + click a grey square; to recall the preset click on it.
- Keyboard icon enable for recall presets from input notes (C6 to B6).
- Double click on the icon to delete all presets. Caution!.

Global Parameter Tweak:
- Press the name of the parameter to reset it.
- All parameters have a button to change the sequencer randomly.
- Roll up and down the parameters with the arrows.
- Click on Master name reset the whole sequence.

Modulation Controls:

- C1, C2, C3, C4, the four controls for map any parameter in Ableton.
- Click on map button; after, click on any ableton control to map; to unmap click on the *X* button.

Matrix for modulation:

- Modulate any parameter with Pitch, Velocity, Controls 1 and 2.

The parameters to be modulated:
- The four Controls, from C1 to C4.
- Control Change.
- Program Change.
- Pitch Bend. (Click on PB to reset to 0).
- After Touch

Panic Button:

- Send a note off to all the notes.


home page: