Mercuriall Spark v1.1.1 CE WiN
Team V.R | 05 May 2018 | 166.05 MB
Spark is a VST/AU/AAX plugin that models four Marshall® tube amplifiers, four guitar cabinets, four overdrive pedals and a set of the most common spatial effects.
Modeling
Spark is the realization of all our latest achievements in the field of real-time electric circuits modeling. First of all, it’s a tube push-pull power amplifier that is working with a reactive load (guitar cabinet), with negative feedback and electric feed chains. This allowed us to implement a truly realistic poweramp saturation (very important for the majority of the Marshall®-based amps), realistic work of the Presence knob and made possible to take into account the influence of the output and power transformers.
Topology of modeled linear circuit of AFD Hi channel (switch #34=off).
One from more than ten linear circuits modeled for Spark.
We have considerably improved the cabinet section. Apart from the smooth positioning of microphones, we added an option to mix sound of two mics. This allows you to find pretty much any desired sound. There are four cabs and three microphones at your disposal.
Despite the fact that Spark is an amp and cab sim above all, we gave a lot of attention to the FX section. There is a Noise Gate at the input, as well as a number of pedals: there are currently four overdrives, implemented with our proprietary technology of the electric chain modeling. As for the spatial effects - 1E37A51FF9EE there are Chorus, Delay and Reverb.
Spark’s UI continues our approach of simple usability at no expense to a wide functionality. All main actions require just a single click. We pay a lot of attention to the design, that passes a lot of iterations of adjustments and improvements, offering you a very simple and functional solution.
Key Features
Electronic circuits of amps and pedals are modeled with our custom technology using Neural Networks
Pedals, preamp and power amp are working within the same oversampling cycle. Thus, there is no latency build-up and no additional losses when using several anti-aliasing filters
Realistic and smooth positioning of up to two microphones simultaneously
Several preamp and power amp tubes to choose from
Stereo-mode: right and left channels are modeled independently. This mode is useful for processing stereo signals. For example, a panned double tracked guitar
Delay and reverb can be used in parallel to get a more expressive effect without extra routing
Plugin supports CPU multi-threading
home page:
https://http://bit.ly/2JTZU8r
DOWNLOAD
Related News:
Mercuriall Tube Amp Ultra 530 v1.1 CE WiNTeam V.R | 05 May 2018 | 33.71 MB Tube Amp Ultra 530 VST/AU/AAX plug-in (briefly U530) based on the popular sound studio preamp ENGL® E530, having a wide range of tone. On this basis, you can customize the sound of the powerful hi-gain to bright crunch and crystal clean tone. We hope that many musicians will use U530 in its arsenal....
Mercuriall ReAxis v1.0.5 CE WiNTeam V.R | 05 May 2018 | 150.17 MB ReAxis is a VST/AU/AAX plugin that models MESA/Boogie® Triaxis™ (rev. TX5A) preamp. It includes tube power amps, four guitar cabinets and three microphones, a Wah-Wah based on Dunlop® 535Q, several overdrive pedals and a set of the most common spatial effects....
HoRNet Guitar Kit VST VST3 AU RTAS AAX Standalone v1.2.0 OSX/WiN RETAiL27.07.2016 | 15.1 MB Guitar amplifier, cabinet and microphone simulator HoRNet Guitar Kit is a guitar amplifier and cabinet simulator, it also includes a microphone simulator to help you get the same sound you would get when recording a guitar amp....
Arturia Wurlitzer V1.1.1.9 R2 MacOSX-PiTcHsHiFteRPiTcHsHiFteR | April 04 2015 | 365 MB The Return of a Classic The Wurlitzer V is a high end software recreation of the classic Wurlitzer 200A electric piano. As most producers know, the legendary bright and overdriven Wurlitzer sound heard on classic records also comes from the use of fine amplifiers, micing and processing....
Comments for Mercuriall Spark v1.1.1 CE WiN:
No comments yet, add a comment!