MellowMuse Plugins Bundle Win64 AAX VST3-V.R

7 plugins by MellowMuse:

CP2V v2.5
CP3V v1.5
CS1V v1.8
EQ1A v2.7
EQ2V v2.2
IR1A v3.7
SATV v2.5


CP2V compressor



The vintage styled CP2V is a track and program compressor plug-in that oozes character and attitude, and is equally at home smashing drums, on vocals or acoustic guitar duties.

The Compression control drives the input against the compressors fixed threshold, while the Output Drive makes up the level, and adds progressively more saturation to the output signal. Preset attack and release times mean there's no need to search for the sweet spot.

CP3V compressor



The CP3V vintage compressor plug-in builds upon the analogue characteristics of our CP2V compressor, while adding further flexibility with variable attack, release and ratio controls.

Input drives the in-coming signal against the compressors fixed threshold, while the Output control brings up the level, adding progressively more saturation to the compressed signal. Fast attack times can be set as low as 0.01 ms with release times of 10 ms to 500 ms, and preset ratios ranging from 4:1 to 20:1.

CS1V console channel



CS1V brings the warmth and depth of an analogue console to your tracks and mixes. Drive increases the level of saturation. Tone adjusts pre-amp character; darker and heavier in the low range anti-clockwise, and progressively brighter high end harmonic boost clockwise. There are two selectable preamp modes: A is darker in character overall, while B has a flatter frequency response.

The default "Channel" mode is intended for mono tracks. When inserted on stereo tracks or auxes, the "Buss" setting can be used to add a subtle amount of crosstalk, as in a hardware mixer. Engaging the automatic gain control (AGC) attenuates the output to match the source volume.

EQ1A equalizer



EQ1A is a super smooth, analog style equalizer plug-in, with minimal phase coloration. It features a high pass filter with variable Q, frequency sweepable low and high shelf filters, and sweepable low and high peak filters with variable Q. A bypass switch is available in each filter section for increased flexibility.

The interface takes it's inspiration from classic outboard eqs, with all controls in easy reach. The CPU efficient design allows high instance counts, making it a versatile EQ for all tasks.

EQ2V equalizer



The EQ2V is a vintage styled equalizer plug-in that recreates the weight and colour of its classic hardware counterparts. 2nd and 3rd order harmonic coloration increases with output level and eq gain, adding depth and warmth to any material.

The SofTran feature is useful for taming signals that contain sharp transient peaks like snare and high hats, especially after boosting the highs. All equalization and saturation algorithms are oversampled, using 64bit internal processing for superior clarity and resolution.

IR1A convolution reverb



IR1A is a convolution reverb plug-in, with an advanced zero latency convolution engine, ideal for re-creating natural room ambiences, guitar cabinets or special Fx.

IR1A loads standard mono or stereo aiff/wav impulse response files (max of 10 seconds in length) in either aiff or wav format. IR start and end times can be set, and high or low pass filtering, and predelay applied, allowing creative shaping of the original IR file.

IR1A comes with a small selection of IRs, including reverbs, room ambience and guitar cabinets. The integrated file browser makes it easy to navigate and load files from other 3rd party libraries.

SATV analogue saturator



SATV is an analogue saturation plug-in that adds harmonic depth and richness to any track. Equally suited to individual instruments or multi-track drum kits, SATV allows you to effortlessly change the harmonic content and dynamics of your whole mix. The four selectable saturation models: Transistor, Transformer, Tube and Tape allow a wide range of sound shaping options, from subtle warmth to extreme crunch.


home page: