Faber Acoustical Electricoacoustics Toolbox 3.8.2
Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support.
Built-in Tools:
Dual FFT Analyzer (TF/IR analyzer)
FFT Analyzer
Meter Bridge
Octave Analyzer (RTA)
Oscilloscope
Signal Generator
Sound Level Meter
Spectrogram
X/Y Plotter
Additional Measurements:
Frequency response magnitude and phase
Impulse response
Auto and cross correlation
Time delay (latency)
Group delay
Signal-to-noise ratio (SNR)
Total harmonic distortion (THD, THD+N)
Coherence
Crest factor and rms, peak, and peak-to-peak signal levels
Signal mean, variance, and standard deviation values
Flat, A, and C-weighted equivalent (Leq), time-weighted (Lp), and percentile-exceeded (Lx) sound levels
And more
Electroacoustics Toolbox is a project-based application, which allows you to configure and save project files. Projects may contain one or more tools available in the toolbox, along with any captured data associated with those tools. Electroacoustics Toolbox allows for the creation of an arbitrary number of tools of a certain type, or tools of different types. For example, a project may contain an oscilloscope, two FFT analyzers, and two signal generators. The oscilloscope and FFT analyzers may each simultaneously analyze multiple input channels of a single device. However, there is no requirement that all tools must work with the same device. The Toolbox also offers advanced capabilities for configuring input and output device parameters and assigning labels, units, and transducer sensitivities to individual input and output channels.
Features:
Hardware-accelerated OpenGL graphics for fast real-time plotting
Quartz-based graphics for high-resolution still images and prints
Advanced control over input and output devices
Whole device and individual channel sensitivity (level) calibration
Support for units, including Volts, Amps, pascals, and Engineering Units
Saving complete configurations and data in project files
Exporting data to ascii text or MAT-files for easy import into other applications
Work with multiple independent audio devices simultaneously
No arbitrary limits on how many devices or channels are used, or on sample rates or signal formats--these are limited only by your hardware
AppleScript support for measurement automation and remote control
home page:
http://www.faberacoustical.com/products/electroacoustics_toolbox/
http://www.nitroflare.com/view/BAF647037F7B403
http://rapidgator.net/file/646bcd9bfac67477dd96c1443a84f2a7
Links are dead? You can send request (you must be registred user) to re-upload articles
with dead links and our team will try to re-upload files for you as soon as possible.
with dead links and our team will try to re-upload files for you as soon as possible.
Related News:
Faber Acoustical Electroacoustics Toolbox v3.5.2 MacOSX
04.10.2014 | Standalone | HEXWARS Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems....
04.10.2014 | Standalone | HEXWARS Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems....
Faber Acoustical SignalScope Pro v3.1.8 MacOSX-HEXWARS
04.10.2014 | Standalone | HEXWARS SignalScope Pro is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as...
04.10.2014 | Standalone | HEXWARS SignalScope Pro is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as...
Faberacoustical Electroacoustics Toolbox 3 v3.4.1 [Ked] MAC OSX
Faberacoustical Electroacoustics Toolbox 3 v3.4.1 [Ked] MAC OSX | 8.12 MB Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables...
Faberacoustical Electroacoustics Toolbox 3 v3.4.1 [Ked] MAC OSX | 8.12 MB Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables...
Electroacoustics Toolbox 3.4 [k'd]
msj | August 24 2013 | 8.7 MB Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities,...
msj | August 24 2013 | 8.7 MB Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities,...
Comments for Faber Acoustical Electricoacoustics Toolbox 3.8.2:
No comments yet, add a comment!