Sound Radix Plugins Pack by R2R 31.01.2015 WiN

Up until now, EQ's were set to a fixed frequency range. In reality, fundamental frequencies and the harmonic series change with the pitch of the instrument or vocal track. This characteristic makes the standard, fixed-frequency EQ less effective when it is used to manipulate the instruments/vocals harmonics.

Enter SurferEQ.

SurferEQ tracks the pitch of the instrument or a vocal track and can change the EQ frequency accordingly in real-time, making it possible for the first time to naturally control the fundamental frequencies or harmonics of a track. Just set any of the EQ bands to a desired harmonic and watch SurferEQ move with the track, staying always relevant to the music.

For over a year, we've meticulously developed an accurate, real-time pitch detection engine with virtually no octave errors. There's no need for endless parameters tweaking. It just works.

When developing our original analog-behaving asymmetric EQ algorithms (No cookbook EQ here!), we've made every effort to preserve the size and energy of the original recording. SurferEQ sounds natural even when it is pushed to its extremes. In addition to the HP, LP, shelf and bell shaped filters, we've developed a unique four mode harmonic filter. It takes on a whole new life when it moves with the pitch and makes it possible to achieve new sounds as never heard before.

We are excited and proud to finally put our creation in your hands. We hope you'll find it inspiring and creative as we have. Surf on!

Pi is an innovative, multi-channel phase interactions mixer plug-in engine for Mac and PC.

Pi works to improve the summing of a DAW or a mixer. Pi dynamically minimizes frequency cancellations between instruments within the mix, improves mono compatibility and brings back the lost depth and focus lost when overlapping frequencies collide.

Good phase relationships between mixer tracks, are a key to great sounding mix. Normally, where mixer channels are summed into a single stereo mix bus, instruments overlap and interact with each-other across the frequency range and phase position. Often, a bass track could be temporarily out-of-phase with the kick or rhythm guitar tracks, and when summed into a mix, end up cancelling each-other over the overlapping frequency range, causing a temporary "hole" in the low end. Similarly, a snare track could end up sounding thin in a mix when the toms resonance are out of phase with the snare.

Enter Pi.

Designed to enhance any mix, Pi dynamically rotates the phase of the individual mixer channels to achieve maximum phase correlation within the mix. Pi minimizes negative interaction and significantly improves the overall sound of the mix. Just drop Pi into the last insert slot of your DAW mixer channels and listen. Use any of the 64 groups to bind related instrument channels to enhance your mix even further.

Features

Groundbreaking, true multi-channel engine, dynamically optimizes phase relationships between mix channels for optimal sounding mix
Three-mode track grouping for enhanced related instruments and multi-mic setup phase correlation optimization
Full Range and Low Frequency global optimization modes
Four mode multi-channel phase correlation display, enables a unique view of the phase relationships within the mix
Internal, inter-channel sample accurate routing, no complicated side-chaining required

Drum Leveler is a new beat detection-based downward and upward compressor/expander. By selectively applying gain to single drum beats, Drum Leveler easily achieves the desired target level for each beat, without affecting bleed noise or beats that are out of the user-defined processing range.

Unlike traditional envelope-followers that detect incoming levels and utilize VCA to apply gain changes, Drum Leveler runs an advanced new algorithm that takes full advantage of the digital domain – allowing unparalleled control over your drums' dynamics.

Drum Leveler is powerful yet easy to use. It will help you achieve solid driving grooves, improve clarity and add punch to any percussive performance.

Drum Leveler brings a new, radical approach to drum’s dynamics control. We’d like to encourage you to take the time and explore Drum Leveler to utilize its full power.

When recording an instrument with more than one mic, sound tends to reach each microphone at a slightly different time and thus cause some frequencies to cancel each other while other frequencies can build up unnaturally. This phenomena is known as the comb filter effect.

Until now, compensating for the delay between the microphones had to be done manually - an extremely time consuming and inaccurate process.

Overview

When recording an instrument with more than one mic, sound tends to reach each microphone at a slightly different time and thus cause some frequencies to cancel each other while other frequencies can build up unnaturally. This phenomena is known as the comb filter effect.

Until now, compensating for the delay between the microphones had to be done manually - an extremely time consuming and inaccurate process.

Enter Auto-Align.

Auto-Align will "listen" to your multi-mic recording and automatically measure and compensate for the delay between the microphones, or between a DI box and a microphone - sample accurately, significantly reducing the comb filter effect and dramatically improving the resulting sound.

When distant microphones are used and a delay is desired to enhance the sense of space, Auto-Align can time-place the microphones to better match the close-mic'ed source and therefore minimize the comb filter effect. Auto-Align can also automatically detect a reversed polarity mic and compensate for it.

http://www.soundradix.com

http://uploaded.net/file/5tdpay2j/SoundRadix31012015.rar

http://rg.to/file/f31818de420cf5c71a5cfa4b9a72add5/SoundRadix31012015.rar.html

http://rockfile.eu/wgimbu80rl8z.html