Cupwise Plates Of Legend Vol.3 Nebula 4 Library Nebula
P2P | 17 July 2021 | 1.47 GB
A (stereo) gold foil plate reverb was used to make the programs in this library. They’re smaller than the more well known model plates used in parts I and II of this series, and said to sound darker. I think the reverb you get from this library is slightly darker than the stereo plates sampled for parts I and II, but not as dark as the mono ones. In my opinion this one is much ‘smoother’ than any of the previous plates too. It definitely sounds unique, but you can hear it for yourself by downloading and trying out the demo program, so do that now!
Just like the previous ones, this plate was sampled for use in Nebula to include a fully functional, sampled dampening control. It sounds and works great. You won’t find too many other Nebula reverbs with sampled adjustable controls in them, besides some of the other ones I’ve done. This does however mean that to use the 96khz version of the set you will need to be using the 64bit Nebula plugin (44.1khz version runs fine on 32bit). If you’re worried about CPU usage, I’ve made lite versions of the programs that you can use while mixing to fine tune the settings as you like, before switching to the full versions to render.
There are plenty of bonuses, just as before. This includes a stereo swapped version, a ‘mono’ version that only uses the sampled left channel from the hardware for both of your channels going into Nebula, another that only uses the sampled right channel, and another special mono version that uses a mix of the sampled left and right channels for each of your input channels (which gives a thicker sound).
Then there’s a ‘bionic’ program, which contains 3 selectable variations of the gold plate sound. These were sampled using a trick I came up with several years ago and which involves playing/recording the tones used in the sampling process at faster or slower speeds. It gives you slightly ‘darker’ or ‘brighter’ versions to use and they sound just as good as the main program, but different.
Last but not least, these plates are now skinned with excellent custom skins by Max Ponomaryov, aka azzimov! There are skins for both N3 and N4. The N3 skins allow you to switch between multiple programs without losing your settings (like the lite and full programs, or even trying out other plates).
home page:
https://bit.ly/3eqhGSs
DOWNLOAD
Related News:
Cupwise Cassette Deck 3 Multi Effects Pack Nebula
P2P | 13 July 2021 | 1.07 GB This release is really like a bundle of maybe 3 complete collections of different types of Nebula programs, plus a bonus effect. Most of these effects were made using a Marantz 4020 cassette deck, which has 3 heads and can record/play at double speed, giving increased performance (extended high freq range is one example), however some of the reverbs and one of the...
P2P | 13 July 2021 | 1.07 GB This release is really like a bundle of maybe 3 complete collections of different types of Nebula programs, plus a bonus effect. Most of these effects were made using a Marantz 4020 cassette deck, which has 3 heads and can record/play at double speed, giving increased performance (extended high freq range is one example), however some of the reverbs and one of the...
Cupwise FX CupReels Ax102 Nebula
P2P | 13 September 2020 | 833 MB Three reel to reel tape decks of the same model, typically used for mixdowns/masters, were sampled for use in Nebula. The resulting four tape programs are usually subtle but can be driven for more noticeable harmonics and tone. There are also 6 reverb programs which were sourced from my other reverb libraries, then printed onto and back off of tape with two of...
P2P | 13 September 2020 | 833 MB Three reel to reel tape decks of the same model, typically used for mixdowns/masters, were sampled for use in Nebula. The resulting four tape programs are usually subtle but can be driven for more noticeable harmonics and tone. There are also 6 reverb programs which were sourced from my other reverb libraries, then printed onto and back off of tape with two of...
Cupwise FX Raybon & Norland-B Spring Reverbs Nebula
P2P | May 15 2016 | 1.05 GB This set includes two very different sounding spring reverbs. The ‘Raybon’ hardware actually has two separate sets of springs in it, producing a stereo reverb (and was sampled as such). The 'Nolard' part of this library was made from the same model I used for my previous Nolard Spring set, but a different actual unit was used. Both reverbs have EQ controls which were...
P2P | May 15 2016 | 1.05 GB This set includes two very different sounding spring reverbs. The ‘Raybon’ hardware actually has two separate sets of springs in it, producing a stereo reverb (and was sampled as such). The 'Nolard' part of this library was made from the same model I used for my previous Nolard Spring set, but a different actual unit was used. Both reverbs have EQ controls which were...
Comments for Cupwise Plates Of Legend Vol.3 Nebula 4 Library Nebula:
No comments yet, add a comment!