Adam Monroe Music Rotary Organ v2.0 WiN MacOSX

Adam Monroe's Rotary Organ was sampled from a Hammond M3 tonewheel Organ. The end goal was to simulate the sound of a Hammondnd B3 organ with rotating Leslie Speaker inside of a VST/AU/AAX plugin. Every drawbar on every note was sampled individually via the organ's built-in speaker through a Neumann TLM 102 microphone.

The signal was re-amped though a Fender Deluxe Reverb and recorded via a Sennheiser e906. Both signals were run through Grace M101 preamps. A Hammond M3 Organ combines the last two harmonics into a single drawbar, this note was omitted. Instead, a "digital foldback" teqchnique was used to extend the harmonics of the Hammond M3 to be similar to that of a Hammond B3.

The organ's range was augmented to be similar to that of a Hammond B3. This was accomplished by using the Organ's pedal tones to add the lower octave notes.

The Leslie Speaker simulation was designed to mimic a real Leslie. The signal is split to a virtual bottom rotor and virtual upper rotor at around 600 Hz. Vibrato, chorus, and panning processing are used to simulate the rotation of the rotors. The upper rotor spins between 48/409 RPM's and the bottom rotor spins between 40/354 RPM's. Bottom rotor rotation can be bypassed. The Leslie simulation can also be bypassed.

B3 effects where also digitally simulated and these include percussion, vibrato, and key click. Vibrato scanner is similar to that of a B3 and includes vibrato as well as vibrato+chorus. Key click was simulated by adding random noise to the attack and release samples. Some key click can be heard in the original samples but the effect has been exaggerated. Percussion was simulated in VST as it is in real life: a higher amplitude, percussive decaying sound is added to the instrument via the 2nd or 3rd harmonic. The plugin also includes reverb, braking, variable acceleration, drive/distortion, smoothing, adjustable stereo panning, key-splitting, and preset switching.

ENGINEERING:
The instrument was equalized to sound slightly more aggressive than a typical Hammond organ and therefore has the potential to stand out more in a mix. This can be adjusted with the "smoothing" knob, which will attenuate some of the harsher frequencies

Inside the VST the amp and speaker signals go through preamp/gain staging whether or not the Leslie bypass is engaged. The plugin requires a decent CPU - at least an Intel Core I3. This is because internally each harmonic is being summed for each note - which can include things like percussion and key click - meaning that each note requires upwards of 22 voices. Internally the VST is capped at 330 voices, which is equivalent to 15 notes of polyphony. The voicelist also requires extra processing power, as (unlike a piano or other percussive instrument) each not can be sustained indefinitely, and thus newer notes must work around this limitation.

The plugin also does a fair amount of internal eq and sonic shaping depending on the preset. A great deal of time was spent experimenting and finding useful drawbar settings and eq combinations. There are 32 built-in presets modeled after classic Hammond Organ drawbar settings. You can hear an audio demonstration of these presets in the mp3 section.

The memory footprint of the plugin is around 400 MB. All of the plugin's samples are loaded into memory upon loading as the plugin is primarily comprised up of looped samples, padded out with short attack and release samples. This means that this particular plugin is not dependent on a fast hard drive as it does not need to buffer samples during execution.

The plugin is designed to work with VST AU and AAX native versions and a Kontakt version was not created. This is because the plugin relies heavily on internal programming - for everything from the Leslie simulation to sample fold-back - that would be impossible to replicate with the Kontakt player's simple scripting language.

This VST is, essentially, a hybrid between a Hammond M3 and B3 with a more aggressive sound. It is meant to sound a bit unique to already existing plugins and simulations, but with the wide range of parameter combinations, many sounds are possible.

Release v2.0 6/13/2020
***********************
Improvements since last version:
*Added amplifiers using Vacuum Tube simulations
*Added speaker/EQ curves
*Made the plugin less bright with a soft/bright switch and an "angle" knob that controls the directionality of the Leslie
*Added many presets based on famous songs
*Added separate controls for Bottom+Upper pan and volume
*Added a mellow knob.
*Added a chorus knob
*Added a knob to control percussion boost/cut
*Added an overdrive switch (toggles old distortion algorithm on/off)
*Added trim+volume knobs to feed the amplifier
*Added volume controls for Leslie and DI volume and panning.
*Added Knobs to control Upper+Bottom rotor Depth
*Added a Reverb Size Knob
*Added a delay knob
*Made the Leslie control Midi reassignable
*Volume Swell controls (also Midi reassignable)
*Added a switch to turn off lower-manual keyclick
*Added a switch to toggle between Midi leslie control and velocity.
*Leslie speed can also now be controlled from midi notes (AO/Bb0)
*Added a "Flip Swell" switch to invert midi pedal control on volume swell
*Fixed the bottom+upper rotor speeds and acceleration rampups to be more accurate
*Added "whoosh" (the sound of the leslie spinning) and a switch to toggle it on/off

Bugs Fixed
Plugin may be slightly more optimized now

MAC AU x86 x64 | MAC VST x86 x64 | MAC AAX | WiN VST x86 x64 | WiN AAX



home page: